Shock Compression Adjustment (Fox) - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

3. Turn the lower adjustment ring clockwise (+) to

increase ride height or counter-clockwise (-) to

decrease ride height.

Piggyback Shock

DO NOT increase the spring adjustment by more than

one inch (25.4 mm) over the factory setting.

4. Once you have obtained the correct ride height, hold

the lower adjustment ring while tightening the upper

adjustment ring to lock them in place.

Always return the spring to the factory setting after the

load is removed from the vehicle. The increased

suspension height will negatively impact vehicle

stability when operating without a load.

SHOCK COMPRESSION ADJUSTMENT

The compression damping adjustment is located on the

shock 'Piggyback' reservoir of each shock. Damping

adjustments can be made without using any tools.

When the adjuster knob is turned counter-clockwise

until it stops, the damping is in the fully open position

Turn the adjuster knob clockwise to increase

compression damping. Turn the adjuster knob counter-

clockwise to decrease compression damping.

The recommended factory setting for the front and rear

shocks are provided in the following compression

COMPRESSION ADJUSTMENT TABLE

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

adjustment tables.

COMPRESSION DAMPING

Full counter-clockwise position

12 clicks from closed

2 clicks from closed

Chapters

Table of Contents