Hood Removal; Upper Dash Removal; Lower Dash Removal - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

BODY / FRAME

HOOD REMOVAL

1. To remove the hood, turn both 1/4 turn latches

disengage the rear portion of the hood.

2. Lift rear of hood and slide forward to disengage the

front tabs and remove the hood from the vehicle.

1. Remove the hood as previously described.

2. Remove the two T-40 Torx screws retaining the

Upper Dash cover between the front fenders

3. Disconnect the instrument cluster, AWD switch,

headlight switch, and ignition switch. Note their

location and wire routing. Remove the upper dash.

1. Remove the Upper Dash (see Chapter 10 – Upper

Dash Removal page 11.18

2. Remove the two T-40 Torx screws retaining the dash

and the one T-40 retaining the back of the dash to the

3. Remove the dash assembly from the vehicle.

The lower dash is also held by clips. Pull the dash

straight out to disengage the clips..

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

Table of Contents