Polaris RZR 900 2017 Service Manual page 364

PVT SYSTEM
5. Install the spring so the arm
the moveable sheave.
o
6. Align the X's on the spider and moveable sheave.
7. Install the universal clutch compressor on the clutch
and compress the helix cover.
The helix cover is loaded by the spring. Not using a
proper compressor may result in personal injury or
damage to the clutch.
6.28
i
rests into the notch in
CAUTION
8. Align the marks previously made on the helix cover
and moveable sheave. Install the helix/cover and the
four fasteners
9. Once back together, verify the grease / tape marks
made during disassembly are properly aligned.
10. Install the drive clutch on the vehicle. See PVT
Assembly page
9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual
a
. Torque fasteners to specification.
TORQUE
Helix Retaining Screws:
48 in-lbs (5 N·m)
© Copyright Polaris Industries Inc.