Suspension System; Spring Adjustment (Non-Fox) - Polaris RZR 900 2017 Service Manual

Hide thumbs Also See for RZR 900 2017:

Table of Contents

SUSPENSION SYSTEM

The front and rear shock absorber springs are adjustable

by rotating the adjustment cam to change ride height.

Uneven adjustment may cause poor handling of the

vehicle, which could result in an accident and serious

injury or death. Always adjust both the left and right

springs equally.

1. Position the vehicle on a level surface and stop the

2. Raise and safely support front or rear of vehicle off

the ground to allow the suspension to fully extend.

The tires should not be touching the ground.

3. To adjust the suspension, rotate the adjustment cam

clockwise to increase spring tension or counter-

clockwise to decrease spring tension.

Shock Spanner Wrench:

4. Each notch of the adjustment will add 6% - 8% more

preload to the spring over the primary position.

9930588 R02 - 2017-2020 RZR 900 900/S 900/S4 1000/S 1000/S4 Service Manual

Table of Contents