Table of Contents
Advertisement
DIAGNOSTICS (continued)
2.1
Service Selection Screen
To access the Service Selection Screen, press and hold the LOG DATA key and
the hidden key directly to the right of the LOG DATA key, then press the
CHECKOUT key. The Service Selection screen appears as shown in Figure 2-1.
The Service Selection Screen displays the available service functions. Access
to these service functions is gained through the Centralert CRT control keys
below the service screen which temporarily function according to their
corresponding on-screen labels. The SELECT key advances the cursor to the
desired menu option, and the ENTER key opens the selected service screen.
Pressing the END CONFIGURE key exits the Service Selection Screen. This
screen also exits automatically after two minutes have elapsed.
SELECT
Figure 2-1: SERVICE SELECTION SCREEN
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
>
CONFIGURE DEFAULTS
> SERVICE DATA
ENTER
2-2
RETURN TO CD-ROM TABLE OF CONTENTS
END
CONFIGURE
NM3
Rev. E
Advertisement
Table of Contents
Troubleshooting
