Srx345 Firewall Interface Modules Overview - Juniper SRX345 Hardware Manual

Table 5: SRX345 Firewall Back Panel Components
Callout
3
Table 6 on page 12 describes the LEDs on the AC power supplies for the SRX345 Firewall with dual AC
power supplies.
Table 6: SRX345 Firewall (with Dual AC Power Supplies) Back Panel LEDs
LED Color
Green
Off

SRX345 Firewall Interface Modules Overview

Mini-Physical Interface Modules (Mini-PIMs) are field-replaceable network interface cards (NICs)
supported on the SRX300 line of services gateways. You can easily insert or remove Mini-PIMs from the
front slots of the services gateway chassis. The Mini-PIMs provide physical connections to a LAN or a
WAN. The Mini-PIMs receive incoming packets from the network and transmit outgoing packets to the
network. During this process, they perform framing and line-speed signaling for the medium type.
CAUTION: The Mini-PIMs are not hot-swappable. You must power off the services
gateway before removing or installing Mini-PIMs.
The following Mini-PIMs are supported on the SRX345 Firewall:
• 1-Port Serial Mini-Physical Interface Module (SRX-MP-1SERIAL-R)
• 1-Port T1/E1 Mini-Physical Interface Module (SRX-MP-1T1E1-R)
• 1-Port VDSL2 (Annex A) Mini-Physical Interface Module (SRX-MP-1VDSL2-R)
• LTE Mini-Physical Interface Module (SRX-MP-LTE-AE and SRX-MP-LTE-AA)
(Continued)
Component
Power supply input
Description
Receiving power
No power
Description
Connects the services gateway to
the AC power supply.
12