Installing A Mic In An Ex9200-Mpc Line Card; Table 4: Led On Line Cards For Ex9200 Switches - Juniper EX9200 Manual

Hardware Topics for Aloha Line Card
Related
Documentation

Installing a MIC in an EX9200-MPC Line Card

6

Table 4: LED on Line Cards for EX9200 Switches

LED Color
Green
OK/FAIL
Unlit
Red
EX9204 Switch Hardware Overview on page 69
EX9208 Switch Hardware Overview on page 81
EX9214 Switch Hardware Overview on page 91
EX9200-MPC line card accepts any of the following Modular Interface Cards (MICs):
EX9200-10XS-MIC
EX9200-20F-M-MIC
EX9200-40T-MIC
EX9200-MPC line card has slots on the faceplate in which you can install the MICs. You
can install them in the following configurations:
One EX9200-10XS-MIC
One EX9200-20F-M-MIC
One EX9200-10XS-MIC and one EX9200-20F-M-MIC
Two EX9200-10XS-MICs
Two EX9200-20F-M-MICs
One EX9200-40T-MIC
The MICs are hot-insertable and hot-removable field replacable units (FRUs): You can
remove and replace them without powering off the switch or disrupting switch functions.
However, if you remove a MIC, the interface for that MIC ceases to function.
Before you begin installing a MIC in an EX9200-MPC line card:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage (see Prevention of Electrostatic Discharge Damage).
Ensure that you know how to handle and store the line card (see Handling and Storing
Line Cards in EX9200 Switches).
State and Description
On steadily—The MIC is functioning normally.
The MIC is not online.
On steadily—The MIC has failed.
Copyright © 2016, Juniper Networks, Inc.