Firmware Installation - Roland VersaUV LEF2-200 Service Notes

Firmware Installation

Information
Necessary tools
Software
Peck
Latest firmware
Typical work time
Contents of work
Firmware Installation
Workflow
C AUTION
• It is necessary to prepare the following to upgrade/install the firmware .
• Firmware
• Windows computer (Network port is required .)
• Peck .exe
• Network cable
• Perform this procedure when a new main board without firmware is installed .
1.
Connect the machine to a computer by using a network cable .
2.
Turn on the main power switch while pressing the [] [] [] keys .
UPDATE FIRMWARE?
Time
10 min .
+
2-18
2
L EF 2-200