Print Head Replacement
15.
Remove the print head from the head adapter . Then, install a new print head using a torque driver .
C AUT ION
• Install the new print head by pressing it against the bottom left corner of the adapter .
• Use a 20 cN ・ m torque driver (ST-056) for tightening the screws .
1 . Print head
2 . Head adapter
2
16.
Temporarily fix the print head to the head carriage with three screws .
C AUTION
• Before fixing the print head, make sure that the earth terminal is placed under the head shield .
• Use a 20 cN ・ m torque driver (ST-056) for tightening the screws .
1 . Earth terminal
2 . Head shield
1
1
2
1-11
1
L EF 2-200