Roland VersaUV LEF2-200 Service Notes page 123

Ink Damper Replacement
3.
Remove ink dampers you are going to replace from the adapter damper of the print head .
C AUTION
• Ink dampers may break if you grasp them too hard .
• Remove the ink dampers with the head board cover attached . It prevents ink from dripping on the head board . If ink drips
on the head board, the print head or the head driving IC will break . Hold the top end of the damper shield when remove
the ink damper .
4.
Pull out the ink damper from the damper shield and set a new ink damper in the damper shield .
Completion drawing
4-1.
The cover part should be outside .
1 . Adapter damper
1
1-116
1
L EF 2-200