Battery replacement
Cover That Needs to Be Removed
Workflow
C AUTION
Danger of explosion if the lithium battery is incorrectly replaced . Replace only with the same or equivalent type recommended
by the manufacture . Dispose of used batteries according to the manufacturer's instructions .
Do not recharge, short-circuit, disassembly the lithium battery, nor put it into fire . It may cause heat, explosion and fire .
Put tape around the lithium battery for insulation for disposal or preservation .
It may cause heat, explosion and fire .
1.
Remove the third board stay from the bottom from the chassis referring to Chapter 1 "Board Replacement" so that you can
access the main board which is on the second board stay from the bottom .
2.
Remove the battery on the main board by pushing it down and tilting it towards left .
①
②
Right top cover
Right side cover
Panel cover
CAUTION
Socket
Main board
1-84
Plate
L EF 2-200
1