Roland VersaUV LEF2-200 Service Notes page 182

Flushing Position Adjustment
2.
Make sure to unload the media when it is set on the machine .
3.
Select [SERVICE MENU] > [PRINT MENU] > [FLUSHING ADJ .], and press the [ENTER] key . The print-head carriage
automatically moves to the current flushing position .
SERVICE MENU
PRINT MENU
PRINT MENU
FLUSHING ADJ.
FLUSHING ADJ.
0.00mm
4.
Move the cap tops and heads to the position where the cap case guide makes contact with the carriage cap guide by
pressing the [] [] keys . Then, press the [ENTER] key to update the flushing position . If you press the [MENU] key, the
flushing position will not be updated, and display returns to the menu .
1 . Guide
5.
(End of procedure)
[ ] [ ]
ENTER
-0.40mm
ENTER
1
2-41
2
L EF 2-200