Roland VersaUV LEF2-200 Service Notes page 172

Print Head Alignment
16.
Position the panel cover temporarily without securing it with screws .
17.
Print the test pattern again . If the result is not satisfactory, repeat steps 7 to 16 . If the VERTICAL test print result is
satisfactory, select [HEAD ADJUST] > [BIAS/VERTICAL] > [TEST PRINT], and print the test pattern again . If the BIAS/
VERTICAL test print result is not satisfactory, repeat BIAS/VERTICAL adjustment .
C AUTION
The shifting of lines should be less than 1/2 dot .
SERVICE MENU
PRINT MENU
PRINT MENU
HEAD ADJUST
HEAD ADJUST
BIAS/VERTICAL
BIAS
TEST PRINT
Horizontal Adjustment
18.
Select [SERVICE MENU] > [PRINT MENU] > [HEAD ADJUST] > [HORIZONTAL] > [TEST PRINT], and press the [ENTER] key .
SERVICE MENU
PRINT MENU
PRINT MENU
HEAD ADJUST
HEAD ADJUST
HORIZONTAL
HORIZONTAL
TEST PRINT
[ ] [ ]
[ ] [ ]
[ ]
[ ] [ ]
[ ] [ ]
[ ]
2-31
2
L EF 2-200