Roland VersaUV LEF2-200 Service Notes page 171

Print Head Alignment
14.
Turn the adjustment screw to make the lines of each color in the test pattern straight .
NOTE
Position of the printing moves 1/2 line by turning the screw 3/4 turn .
C AUTION
Adjust the print head positions referring to the left end K head as the base position . The position of K head on the left end
does not need to be adjusted .
" When the lines other than K are above the K lines, turn the adjustment screw CW .
" When the lines other than K are below the K lines, turn the adjustment screw CCW .
15.
Tighten the screws that secure the print head in the reverse order of loosening, using the torque driver (Torque value:
20cN·m) .
C AUTION
Be careful not to tighten them too hard .
Top view
2
3
1
2-30
2
L EF 2-200