Roland VersaUV LEF2-200 Service Notes page 206

Print Area Adjustment
6.
Move the table by pressing the [] [] keys for FEED AXIS, and move the print-head carriage by hand for SCAN AXIS so
that the LED pointer points lower right position of the print area .
7.
Move the print-head carriage slowly by hand for SCAN AXIS, and adjust the table position so that the LED pointer does not
move outside of the print area .
8.
Tighten the screws in the order as shown below .
1
3
9.
(End of procedure)
2
4
2-65
2
L EF 2-200