Roland VersaUV LEF2-200 Service Notes page 52

Circulation Pump Replacement
12.
Attach the motor .
13.
Attach the circulation pump plate .
14.
Attach the pump unit to the machine .
15.
Connect the ink tubes from the ink cartridge and the ink tubes from the print-head carriage to the pump .
C AUTION
• Insert the tubes as far as they will go .
• Refer to the figure and connect the ink tubes . Wrongly connected tube does not circulate the ink correctly .
• As indicated in the rear and top view, connect the tube from the print-head carriage to the right connector of the pump,
and connect the tube from the Y tube joint to the left connector of the pump .
Rear view
Print carriage
Ink cartridge
16.
Plug the connector of the motor .
17.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] [] keys to enter the
service mode .
18.
Select [SERVICE MENU] > [I/S MENU] > [PUMP CHECK] > [PUMP SUCTION] > [CIR-PUMP], and press the [ENTER] key . Visually
check that the pump works properly .
SERVICE MENU
I/S MENU
I/S MENU
PUMP CHECK
PUMP CHECK
PUMP SUCTION
PUMP SUCTION
CIR-PUMP
4
6 5 3 2
Gl
or
Pr
or
K M
W Y
Wh
[ ] [ ]
[ ]
[ ] [ ]
ENTER
Pump
1
C
1-45
1
L EF 2-200