Table Height Adjustment
11-2.
Setup the clear film on the machine .
C AUT ION
Set the table height by auto detection .
11-3.
Select [SERVICE MENU] > [TEST PATTERN] > [SLOPE CHECK] and press the [ENTER] key .
SERVICE MENU
TETS PATTERN
TEST PATTERN
SLOPE CHECK
PERFORMING
11-4.
A test pattern is printed . Confirm that the interval of the two lines are same in the test pattern .
OK
* The interval of two lines are same .
No Good
* The interval of the two lines are different .
* Two lines are overlapped .
12.
(End of procedure)
[ ] [ ]
[ ]
TEST PRINT
2-72
2
L EF 2-200