Roland VersaUV LEF2-200 Service Notes page 29

Cap Top Replacement
2.
Select [SERVICE MENU] > [MOTOR MENU] > [AXIS MOVE] > [FEED], and set the value to [Y: 2 .8mm] to move the table unit
to the rear .
SERVICE MENU
MOTOR MENU
MOTOR MENU
AXIS MOVE
AXIS MOVE
FEED
AXIS MOVE
Y:2.8mm
3.
Turn off the power switch and remove the covers .
4.
Unlock the head carriage, and move it to the left by hand .
5.
Unhook the cap frame while holding it . Then, remove it carefully .
C AUTI ON
There is a spring under the cap top . If you do not hold the cap frame while unhooking it, the cap top may jump out .
6.
Remove the cap top together with the tube .
[ ][ ]
[ ]
ENTER
ENTER
1-22
1
L EF 2-200