Roland VersaUV LEF2-200 Service Notes page 243

Front Cover Sensor Adjustment
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
1.
Confirm that the front cover is set in the right place by checking the following points . If the front cover is not in the right
place, adjust the position .
1 . Under cover
2 . Front cover cushions
2
FUNCTION
CLEANING
MEDIUM CL.
AB
1
2
2-102
2
L EF 2-200