Roland VersaUV LEF2-200 Service Notes page 210

Table Height Adjustment
5.
Measure the other four points and make a note of their height values .
6.
Loosen five fixing screws that secure the table unit .
1
2
7.
Refer to the height values that you made note in step 4 and 5, and adjust the table height by adjustment screws . The
reference value is the lowest value (the highest point of the table) of the all five points .
7-1.
Suppose the height values are as in the figure . Since the point that has the lowest value is the one of lower right corner,
the reference value is 98 .2 mm .
Z=98.4mm
Z=98.3 mm
Z=98.5 mm
Z=98.3 mm
Z=98.2 mm
Reference value
2-69
1 . Fixing screw
2 . Adjustment screw
2
L EF 2-200