Installation - Roland RT-640 Product Manual

8. Installation


Installation
1
Unpacking
2
Printer Installation
3
Ink System Installation
Initial Ink Filling
4
* The pump does not rotate for 10 minutes in order to let ink flow into sab tanks by its own gravity.
Take-Up Unit (TUC-3) Installation
5
* Check which setting a user prefers beforehand, INWARD or OUTWARD.
6
Bidirectional Adjustment
(Perform this adjustment using media a user uses.)
7
Feed Adjuster Adjustment
8
RIP Software Installation
Explanations about how to operate the
9
printer and how to use RIP software
*This is for reference only.
The amount of time required for each procedure may vary depending on the installation environment.
Referential time: 20 min.
Referential time: 30 min.
Referential time: 25 min.
Referential time: 20 min.
Referential time: 15 min.
Referential time: 5 min.
Referential time: 60 min.
Referential time: 15 min.
Referential time: Depends on a user's request
Accumulated time: 20 min.
Accumulated time: 50 min.
Accumulated time: 75 min.
Accumulated time: 95 min.
Accumulated time: 110 min.
Accumulated time: 115 min.
Accumulated time: 175 min.
Accumulated time: 190 min.
30/32