Uv Lamp Height Adjustment - Roland VersaUV LEF2-200 Service Notes

UV Lamp Height Adjustment

Information
Necessary tools
General tools
No . 1 Phillips screwdriver
Feeler gauge
Special tools
1000005829 TOOL,VINYL YE UV RESISTANT ST-113
Typical work time
Contents of work
UV Lamp Height
Adjustment
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
• This adjustment is required when table height adjustment or print head height adjustment is performed .
Time
30 min .
FUNCTION
CLEANING
MEDIUM CL.
AB
2-81
1
2
L EF 2-200