Head Gap Sensor Position Adjustment
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the adjustment . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
1.
Turn on the main power switch . Then, turn on the sub power switch while pressing the [] [] [] keys to enter the
service mode .
MENU
SERVICE MENU
FUNCTION
CLEANING
MEDIUM CL.
AB
+
MENU
2-88
2
L EF 2-200