Roland VersaUV LEF2-200 Service Notes page 114

Linear Encoder Board Replacement
C AUTION
Make sure that the encoder scale does not make contact with the encoder sensor and also encoder scale is between the slit
of the encoder sensor .
1 . Encoder sensor
2 . Encoder scale
12.
Move the carriage holder stay to the left . Then, tighten two screws .
13.
Bundle the ink tubes with the clamps . Bundle the ink tubes with the clamps while pushing the ink tubes backward so as
not to locate the front of the print-head carriage .
C AUTION
If you do not bundle the ink tubes, they will pull up the print head, and the print head will be tilted .
No. 1～2
No. 1～4
1
2
No. 3～4
No. 3～6
No. 7～8
No. 5～8
No. 1～4
No. 5～8
1-107
1
L EF 2-200