Roland VersaUV LEF2-200 Service Notes page 247

Front Cover Sensor Adjustment
Front cover sensor position adjustment
11.
Open the front cover and confirm the position of the lower edge of the front cover when the front cover sensor clicks .
Then, close the front cover and confirm the position again . The position of the front cover is proper when both positions
are between the top edge of the under cover and the top edge of the front cover cushions .
No Good
There is a gap between the front cover and the under cover .
2
The front cover lies upon the upper surface of the front cover cushions .
OK No good
C AUTION
Be sure that the gap between the front cover and the frame is parallel .
2-106
L EF 2-200