Key Combinations - Roland VersaUV LEF2-200 Service Notes

Key Combinations

For service engineers
Service mode
Firmware upgrade
Firmware installation
(When replacing the main board)
System parameter initialization
All initialize
Limit/Max . scan width position
Service Report
For users
Language/unit selection
1
Panel key combination
+
+
+
ENTER
+
ENTER
+
+
Panel key combination
+
MENU
2-14
Description
Press the [MENU] [ ] keys to enter the service
menu .
[UPDATE FIRMWARE?] is displayed .
Press the [ENTER] key to upgrade firmware .
Use this key combination to install firmware
after replacing the main board .
In case of a brand-new main board without
firmware installed, [SUM-ERROR] is displayed
when the sub power switch is turned on .
Press the [ENTER] key so that the printer will
become ready to load firmware .
All parameters will be initialized .
Press the [ENTER] key to start initializing .
Press [ENTER] key while aligning Carriage to
cap Heads, and press [ENTER] key . Set up Max .
Scan Width Pos ., and press the [ENTER] key .
Service Report (Adjustment value) is printed .
It is the same as the service report in the service
menu .
Description
Press the [] [] keys to select language/unit
type .
2
L EF 2-200