Roland VersaUV LEF2-200 Service Notes page 62

Ink Tube Replacement
NOTE
The ink tube length between the tube guide in the figure and the damper should be as follows .
14.
Connect the ink tubes to the damper joints and the Y-tube joints .
C AUTION
When you connect the ink tubes, the ink tubes may bend . Do not use the bent ink tube .
Damper sheild
15.
Bundle the ink tubes with the clamps . Bundle the ink tubes with the clamps while pushing the ink tubes backward so as
not to locate the front of the print-head carriage .
C AUTION
If you do not bundle the ink tubes, they will pull up the print head, and the print head will be tilted .
No. 1～2
No. 1～4
No.1 330 mm
No.2 340 mm
No.3 210 mm
No.4 220 mm
No.5 350 mm
No.6 360 mm
No.7 240 mm
No.8 250 mm
Damper joint
Y-tube joint
No. 3～4
No. 3～6
No. 7～8
No. 5～8
No. 1～4
No. 5～8
1-55
1
L EF 2-200