Roland VersaUV LEF2-200 Service Notes page 13

Print Head Replacement
C AUTION
When tightening the two screws on the front, be careful not to tighten them too hard . Doing so may cause the carriage
cover to be distorted and the print heads may become shifted .
Workflow
C AUTION
• To prevent hardened ink from entering into the nozzle, refresh print head before the replacement . Perform medium
cleaning on all print heads if 20 minutes passes .
FUNCTION
CLEANING
MEDIUM CL.
• Always use the UV protection sheet during this adjustment, or ink will harden and clog inside the ink line .
FUNCTION
CLEANING
MEDIUM CL.
AB
1-6
1
L EF 2-200