Roland VersaUV LEF2-200 Service Notes page 158

Firmware Upgrade
6.
The [Peck] dialog appears . Click [Firmware Upgrade] .
7.
Select the firmware file, and click [Open] to send the firmware to the machine .
8.
The machine goes into the firmware upgrade mode automatically . When the upgrade is completed, [COMPLETED]
message is displayed . The sub power turns off automatically .
FIRMWARE
ERASING
WRITING
VERIFYING
COMPLETED
9.
(End of procedure)
V2.0 DATA ERROR
NG
DEVICE ERROR
NG
DEVICE ERROR
NG
DEVICE ERROR
NG
2-17
2
L EF 2-200