Measured Value Display Formats - Endress+Hauser Mycom CLM 152 Operating Instructions Manual

Operation
30
6.5

Measured value display formats

Press ↑ and ↓ to select between different
display formats for the screens. There are
differences in the size of digits and the
number of additional information items.
1st meas. Main display:
value
display Suppl. info:
Main display:
Suppl. info:
2nd meas.
Single-
switch-over),
value
circuit
display
3rd meas. Main display:
value
Suppl. info:
display
1st meas. Main display:
value
display Suppl. info:
Main display:
2nd meas.
Suppl. info:
value
display
Difference
Main display:
3rd meas.
value
Suppl. info:
display
4th meas. Main display:
value
display Suppl. info:
Main display:
5th meas.
value
display
Suppl. info:
1st meas. Main display:
value Suppl. info:
display
Main display:
2nd meas.
Suppl. info:
value
display
Single-
3rd meas. Main display:
circuit
value Suppl. info:
display
4th meas. Main display:
value Suppl. info:
display
5th meas. Main display:
value Suppl. info:
display
Note:
A contact state display only appears
if one or two contacts are configured
as limit contactors.
Conductivity measurement
Conductivity measured value in mS/cm or µS/cm
(large characters for reading from a distance)
Measuring range (only for meas. range switch-over)
Conductivity measured value in mS/cm or µS/cm
Measuring range (only for remote measuring range
Type of temperature compensation,
Substance measured,
Current compensation temperature
Conductivity measured value in mS/cm or µS/cm
Same as 2nd meas. value display plus
contact states (limit contactor only)
Differential conductivity measured value (∆CD)
in mS/cm or µS/cm (large characters)
Measuring range (only for meas. range switch-over)
Differential conductivity measured value (∆CD)
in mS/cm or µS/cm
Measuring range (only for meas. range switch-over),
Type of temperature compensation,
Substance measured,
Current compensation temperature
Differential conductivity measured value (∆CD)
in mS/cm or µS/cm
Same as 2nd meas. value display plus
contact states (limit contactor only)
Conductivity measured value channel 1 (CD1)
in mS/cm or µS/cm
Same as 3rd meas. value display
Conductivity measured value channel 2 (CD2)
in mS/cm or µS/cm
Same as 3rd meas. value display
Concentration measurement
Concentration measured value in % (large characters)
Measuring range (only for meas. range switch-over)
Substance name
Concentration measured value in %
Same as 1st meas. value display plus
Type of temperature compensation,
Current compensation temperature
Concentration measured value in %
Same as 2nd meas. value display plus
contact states (limit contactor only)
Concentration measured value in %
Same as 1st meas. value display plus
Conductivity measured value
Concentration measured value in %
Same as 3rd meas. value display plus
Conductivity measured value
Mycom CLM 152
Endress+Hauser