Table of Contents
Advertisement
8.2.8 Before the insulation test of the motor, disconnect the motor from the drive to avoid
damaging it.
8.3 Replacement of wearing parts
Fans and electrolytic capacitors are wearing part, please make periodic replacement to ensure
long term, safety and failure-free operation. The replacement periods are as follows:
◆Fan: Must be replaced when using up to 20,000 hours;
◆Electrolytic Capacitor: Must be replaced when using up to 30,000~40, 000 hours.
8.4 Warranty
The manufacturer warrants its products for a period of 12 months from the date of purchase.
9. LIST OF FUNCTION PARAMETERS
Notice:
PE group is factory reserved, users are forbidden to access these parameters.
The column "Modify" determines the parameter can be modified or not.
"○" indicates that this parameter can be modified all the time.
"◎"indicates that this parameter cannot be modified during the inverter is
running.
"●" indicates that this parameter is read only.
"Factory Setting" indicates the value of each parameter while restoring the
factory parameters, but those detected parameters or record values cannot be
restored.
Function
Name
Code
P0 Group: Basic Function
P0.00
Control mode
Description
0:Sensorless vector control
90
Factory
Serial
Modify
Setting
No.
0
0
Advertisement
Table of Contents
