IACDRIVE I5000 Series Operation Manual page 62

For details, please refer to description of P7.18 and P7.19.
Function
Code
P7.07
P7.07 determines the display parameters in stop status. The setting method is similar with
P7.06.
The display content corresponding to each bit of P7.07 is described in the following table:
BIT7
FI
BIT15 BIT14
Reserve Reserve
d
Function Code
P7.08
P7.09
P7.10
P7.11
Rectify module temperature: Indicates the temperature of rectify module. Overheat protection
point of different inverter may be different.
IGBT module temperature: Indicates the temperature of IGBT module. Overheat protection
point of different inverter may be different.
Software version: Indicates current software version of DSP
Name
Stop status display
selection
BIT6 BIT5
PID
eedbacf
FV
k
BIT13
Reserve
d d
Name
Rectifier module
temperature
IGBT module
temperatue
Software Version
Accumulated running
time
Description
0~0x1FF
BIT4 BIT3
Output
PID
termina
preset
status
BIT12 BIT11
Reserve Reserve
d d
60
Setting Factory
Range Setting
0~0x1FF 0xFF
BIT2 BIT1
Input
DC bus
termina
voltage
l status
BIT10 BIT9
Reserve Reserve
d d
Setting Range
0~100.0℃
0~100.0℃
0~65535h
BIT0
Referenc
e
frequenc
y
BIT8
Step No.
of
multi-
step