IACDRIVE I5000 Series Operation Manual page 61

When P7.05 is set to be 1, local keypad is valid if external keypad is not
connected.
When LCD keypad is connected, P7.05 must be set to be 0.
Function
Code
P7.06
P7.06 defines the parameters that can be displayed by LED in running status. If Bit is 0, the
parameter will not be displayed; If Bit is 1, the parameter will be displayed. Press
to scroll through these parameters in right order . Press DATA/ENT + QUICK/JOG to scroll
through these parameters in left order.
The display content corresponding to each bit of P7.06 is described in the following table:
BIT7 BIT6
Output
power
Output
torque
BIT15 BIT14
Step
Reserved
No. of
multi-
step
For example, if user wants to display output voltage, DC bus voltage, Reference frequency,
Output frequency, Output terminal status, the value of each bit is as the following table:
BIT7 BIT6
0 0
BIT15 BIT14
0 0
The value of P7.06 is 100Fh.
Notice: I/O terminal status is displayed in decimal.
Name
Running status
display selection
BIT5 BIT4
Rotation Output
current
speed
BIT13 BIT12
FI FV
BIT5 BIT4
0 0
BIT13 BIT12
0 1
Description Setting Range
0~0x7FFF 0~0x7FFF
BIT3 BIT2
Output DC
voltage bus
voltage
BIT11 BIT10
Output PID
termina preset
l nput
status I
terminal
status
BIT3 BIT2
1 1
BIT11 BIT10
0 0
59
Factory
Setting
0xFF
SHIFT
BIT1
Reference Output
frequency frequency
BIT9 BIT8
PID PID
feedback preset
BIT1 BIT0
1 1
BIT9 BIT8
0 0
BIT0