IACDRIVE I5000 Series Operation Manual page 60

P7.03.
0: Jog: Press QUICK/JOG , the inverter will jog.
1: FWD/REV switching: Press QUICK/JOG, the running direction of inverter will reverse. It is
only valid if P0.03 is set to be 0.
2: Clear UP/DOWN setting: Press QUICK/JOG, the UP/DOWN setting will be cleared.
Function
Code
P7.04
function option
Notice:
The value of P7.04 only determines the STOP function of STOP/RST.
The RESET function of STOP/RST is always valid.
Function
Code
P7.05
0: When external keypad exists, local keypad will be invalid.
1: Local and external keypad display simultaneously, only the key of external keypad is valid.
2: Local and external keypad display simultaneously, only the key of local keypad is valid.
3: Local and external keypad display simultaneously, both keys of local and external
keypad are valid.
Notice: This function should be used cautiously, otherwise it may cause malfunction.
Notice:
Name
0: Valid when keypad control
(P0.01=0)
1: Valid when keypad or
terminal control (P0.01=0 or
STOP/RST
1)
2: Valid when keypad or
communication control
(P0.01=0 or 2)
3: Always valid
Name
0: Preferential to external keypad
1: Both display, only external key
Keypad
valid.
display 2: Both display, only local key
selection valid.
3: Both display and key valid.
Description
Description
58
Setting Factory
Range Setting
0~3 0
Setting Factory
Range Setting
0~3 0