5.1.2 Key function description
Key
PROG/ESC
ENTER
∧
∨
SHIFT
RUN
STOP/RST
QUICK
STOP/RST +RUN
Name
Programming/Escap
e
Enter Key
UP Increment Key
DOWN Decrement
Key
Shift Key
Run Key
STOP/RESET
Key
Shortcut Key
Combination Key
Function Description
Entry or escape of first-level menu
Progressively enter menu and confirm
parameters.
Progressively increase data or function codes.
Progressive decrease data or function codes.
In parameter setting mode, press this button to
select the bit to be modified. In other modes
cyclically displays parameters by right shift
Start to run the inverter in keypad control mode
Quick debugging mode1 (by menu), In running
status, restricted by P7.04, can be used to stop
the inverter When fault alarm, can be used to
reset the inverter without any restriction
Determined by Function Code P7.03:
0:Shortcut menu QUICK function. Enter or
escape from the first-level menu.
1: FDW/REV switching
2: Jogging running. The direction is determined
by P0.13.
3: Clear UP/DOWN setting
Pressing the RUN and STOP/RST at the same
time can achieve inverter coast to stop
27