Recorder Control Keys
AutoPilot
™
/Operator Mode:
The AutoCAT
®
2 Series is equipped with an annotating strip chart recorder. You can start
or stop a recording by pressing the Recorder ON/OFF key. Selection of recorded
parameters is done by the use of the Recorder Setup in the multi-function key section.
Control key
RECORDER ON/OFF
Recorder Control Key Function
Description
Turns recorder on/off.
3 . P r i n c i p l e s o f O p e r a t i o n
3 . 3 : C o n t r o l K e y s a n d F u n c t i o n K e y s
Recorder Control Keys
3-39