Arrow AutoCAT 2 Series Operating Manual page 235

AutoCAT
Color Display
1 1 . P e r f o r m a n c e a n d T e c h n i c a l S p e c i f i c a t i o n s
1 1 . 1 : A u t o C A T
® 2 Series Technical Specifications
Multi-color, three-channel, high-resolution, LCD
(Liquid Crystal Display),(480x640) 10.4 inch diagonal
ECG Waveform:
green; contrasting white color on assisted portions
Arterial Pressure Waveform:
red; calibrated in mmHg for direct reading, contrasting white
color on assisted portion of unassisted beats
Balloon Pressure Waveform:
– blue; calibrated in mmHg for direct reading
– sensed through internal strain-gauge transducer
Timing Reference Display (Operator mode only):
– Highlight displays inflate and deflate positions relative to the
R-R interval (except A FIB) on unassisted beats
– Color matches trigger mode and changes to yellow for
deflation >100%
Waveform freeze interval: 7 seconds
Physiological Data:
– Heart Rate (HR)
– Systole (SYS)
– Augmentation (AUG)
– Diastole (DIA)
– Mean Arterial Pressure (MAP)
– Balloon Volume (B. VOL)
Heart Rate (Beats Per Minute, BPM)
– derived from ECG or Arterial Pressure triggering signals
– value averaged over four beats and updated every beat
Arterial Pressure Data (all values mmHg):
– Systole (SYS)
– Augmentation (AUG)
– Diastole (DIA)
– Mean Arterial Pressure (MAP)
– each beat sampled and pressure automatically updated every beat
– Augmentation updated at each assisted beat (zero value given when
no assist seen)
– Assisted arterial pressure data displayed in white
– Unassisted AP data displayed in yellow under assisted parameter
Alarms:
– Yellow display on bottom left display area contains alarm title and
alarm specific troubleshooting information
Help:
– White text display on bottom right area of display area shows key
specific operational information
® 2 S e r i e s S p e c i f i c a t i o n s
Technical Specifications
11-7