Configuring The Output Conditioning - Endress+Hauser HART Proline Promass E 200 Operating Instructions Manual

Commissioning
60
Parameters
100% bargraph value 3 Enter the 100% value to be
shown on the bargraph
display for the measured
value 3.
Value 4 display Select the measured value
shown on the local display.
10.4.4

Configuring the output conditioning

The Output conditioning wizard guides you systematically through all parameters that have to be
set for configuring the output conditioning.
Navigation path
"Setup" menu ® Output conditioning
Description Selection/
User entry
Max. 15-digit floating-point
number with sign
• None
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature
• Totalizer 1
• Totalizer 2
• Totalizer 3
• Current output 1
• Current output 2
Proline Promass E 200 HART
Factory setting
Depends on country and
nominal diameter
None
Endress+Hauser