Front Brake Pads Installation - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
To remove the front brake pads proceed as de-
scribed:
•
Remove the cotter pin (1) from the pin.
•
Remove the pin (2).
•
Remove the two brake pads (3).
DO NOT OPERATE THE BRAKE LEVER ONCE THE BRAKE
PADS HAVE BEEN REMOVED, AS THIS MAY FORCE THE
PISTONS OUT FROM THEIR SEATS AND ALLOW BRAKE
FLUID TO ESCAPE.
Installing
THIS VEHICLE IS FITTED WITH A DOUBLE DISC FRONT BRAKING SYSTEM (RIGHT AND LEFT
SIDE).
ALWAYS REPLACE ALL THE PADS FROM BOTH FRONT BRAKE CALLIPERS.
REPLACING THE PADS OF ONLY ONE FRONT CALLIPER MAY JEOPARDISE THE VEHICLE
STABILITY AND SAFETY, POSING SERIOUS DANGER FOR PEOPLE, OBJECTS AND THE VE-
HICLE ITSELF.
CAUTION
THE FOLLOWING OPERATIONS REFER TO A SINGLE CALLIPER, BUT APPLY TO BOTH.
Braking system
BRAK SYS - 249