APRILIA TUAREG 660 Service Station Manual page 257

TUAREG 660
Rimozione
To remove the rear brake pump it is necessary to
previously empty the oil from the system. Then
proceed as described:
•
Unscrew the four screws (1) and re-
move the frame cover (2) to access the
fixing screw of the rear brake fluid res-
ervoir.
•
Keeping the screw (3) still, unscrew the
nut (4) to disconnect the rear brake flu-
id reservoir and remove the right frame
cover.
•
Unscrew the fixing screw (5) of the
brake line complete with the two wash-
ers (6).
•
Remove the safety O-ring (7) from the
pin that blocks the brake pump control
rod.
Braking system
BRAK SYS - 257