TUAREG 660
Side body panels
To disassemble the side panels it is necessary to
first remove the side tail fairings. Then proceed as
described:
The operations described refer to a side panel
but are valid for both
•
Remove the two screws with relative
washers and separate the side panel
from the side tail fairing.
Side fairings
To remove the side fairings, proceed as described:
THE FOLLOWING OPERATIONS REFER TO
ONE SIDE BUT ARE VALID FOR BOTH.
•
Remove the clip (1).
•
Remove the lateral fastener screw (2).
•
Remove the internal screw (3) that se-
cures the side fairing to the radiator.
Bodywork
BODYW - 289