Rear Abs Sensor - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
WIRING TABLE I - REAR ABS SENSOR
•
The wiring must be secured in the in-
dicated cable gland at a distance of
300 mm from the sensor.
•
Secure the wiring harness using the
slot in the brake calliper bleeder cap.
TABLE I1 - REAR ABS SENSOR
•
The rear ABS sensor wiring must pass
through the cable grommets (1) on the
swingarm and fastened to the brake
line by means of a cable gland (2).
Electrical system
ELE SYS - 105