Handlebar And Ignition Block Area Cable Routing - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
FIGURE K2 - FRONT ABS SENSOR
•
Connect the ABS sensor connector
and hook it to the socket positioned
previously.
•
Using a cable clamp, secure the front
ABS sensor wiring harness to the front
brake line at the point indicated.
TABLE L - HANDLEBAR AND IGNITION
BLOCK AREA CABLE ROUTING
•
Using rubber cable clamps, secure the
handlebar wiring harnesses as shown.
Electrical system
ELE SYS - 67