TUAREG 660
•
After removing the pin (8) extract the
foot rest (9) complete with spring (10).
CAUTION
ALWAYS USE A NEW SLIT PIN DURING REASSEMBLY .
•
Separate the rubber part from the foot
rest.
THE RUBBER PART CAN ALSO BE REMOVED
WITHOUT REMOVING THE FOOT REST FROM
THE SUPPORT PLATE.
•
Keeping the nut (11) still, unscrew and
remove the screw (12) that secures the
exhaust manifold to the support plate.
•
Proceed with the complete removal of
the exhaust to access the screw un-
derneath the support plate.
•
Undo and remove the screw (13).
Chassis
CHAS - 209