Pre-delivery
•
Remove the rear straps.
•
Remove the vehicle from the pallet.
•
For greater safety, carry out the oper-
ation with two people.
HANDGUARD INSTALLATION PROCEDURE
The following operations refer to one handg-
uard but are valid for both.
•
Position the handlebar anti-vibration
weight and the handguards. Using the
appropriate fixing screw complete with
"T" bush, fasten everything in place.
•
Then insert the fixing screw of the
handguard to the mount.
•
Tighten both screws to a torque of 4
Nm (2.95 lbf ft).
PRE DE - 10
TUAREG 660