Adjusting The Levers; Front Brake Lever Adjustment; Rear Brake Lever Adjustment; Clutch Lever Adjustment - APRILIA TUAREG 660 Service Station Manual

Maintenance

Adjusting the levers

FRONT BRAKE LEVER
It is possible to adjust the distance between the
end of the lever (1) and the grip (2), turning the
adjuster (3).
•
Push the control lever (1) forwards and
turn the adjuster (3) until the lever (1)
is at the desired distance.
•
Turning the adjuster anticlockwise, the
lever (1) gets closer to the grip (2).
REAR BRAKE LEVER
The control lever is set to the correct ergonomic
position during assembly of the vehicle.
To adjust the play of the lever:
•
Position the vehicle on its stand and
remove the right frame cover.
•
Unscrew the lock nut (4) partially.
•
Turn the pin (5) checking with a thick-
ness gauge the correct play in the in-
dicated point - 1.5 mm (0.05 in).
•
Finish the adjustment by tightening the
lock nut.

Regolazione leva frizione

Adjust the clutch lever if the engine stalls or if the
vehicle creeps forward when the lever is pulled, or
if the clutch slips, causing a lag in acceleration rel-
ative to increases in engine speed.
Minor adjustments can be realized by acting on the
clutch lever adjuster operating as follows:
•
Turn the adjuster (1) clockwise to in-
crease the play of the lever (2) and
check the operation of the lever sitting
on the vehicle and grasping the hand
grip (3) as when in the riding position.
MAIN - 54
TUAREG 660