Taillight Assy - APRILIA TUAREG 660 Service Station Manual

TUAREG 660

Taillight assy.

To remove the rear light cluster, after removing the
saddle, proceed as described:
•
Unscrew the four screws (1) that fasten
the licence plate holder.
•
Disconnect the connector (2) of the
rear light cluster and the connectors (3)
of the turn indicators to remove the li-
cense plate holder.
•
Remove the screw (4) located under
the tail fairing.
•
On both sides of the vehicle, remove
the side fixing screws (5) of the tail fair-
ing.
Bodywork
BODYW - 287