TUAREG 660
TABLE K2 - ENGINE HEAD AREA CONNEC-
TIONS
•
Connect the purge valve connector.
TABLE L - PROCEDURE FOR THE CORRECT FITTING OF THE ABS CONTROL UNIT CONNEC-
TOR
•
The initial position of the connector coupling lever must be as indicated in the figures.
TABLE L1 - PROCEDURE FOR THE CORRECT
FITTING OF THE ABS CONTROL UNIT CON-
NECTOR
•
Place the connector on the opposite
side of the control unit and lower the
driving lever until the "click" that signals
the end of the stroke is heard.
Electrical system
ELE SYS - 83