TUAREG 660
•
Disconnect the first connector of the
left switch cluster (6) from the guide on
the instrument panel support and dis-
connect it
•
Disconnect the second connector of
the left switch cluster (7).
•
Unscrew the fixing screw (8) of the right
switch cluster and slide it off the han-
dlebar to remove it.
USE NEW CLAMPS DURING REASSEMBLY.
Driving mirrors
Removing the rear-view mirrors:
•
Rest the vehicle on its stand.
•
Lift the rubber protection (1).
•
Loosen the fastening nut (2) by ensur-
ing that the threaded clamp (3) cannot
rotate.
•
Slide up and remove the complete
rear-view mirror unit (4).
Repeat the procedure to remove the other rear-
view mirror, if necessary.
UPON REFITTING AND BEFORE TIGHTENING THE LOCK-
ING NUT, MAKE SURE THAT THE REAR VIEW MIRROR
SUPPORT STEM IS ALIGNED WITH THE HANDLEBAR.
CAUTION
THE VEHICLE MAY NOT BE RIDDEN ON PUBLIC ROADS
WITH THE REAR VIEW MIRRORS REMOVED.
Bodywork
BODYW - 281