TUAREG 660
•
Undo the four screws and remove the
right frame cover.
•
Unscrew and remove the two fixing
screws of the conduit to be able to
move it far enough, to facilitate the re-
moval of the throttle body.
•
Remove the clamp and disconnect the
pipe from the purge valve.
CAUTION
DURING REASSEMBLY, USE A NEW METAL CLAMP.
•
Remove the two metal clamps secur-
ing the throttle body to the rubber mani-
folds.
•
Disconnect the throttle body.
CAUTION
USE NEW METALLIC CLAMPS DURING REASSEMBLY.
Maintenance
MAIN - 45